Latest Hyundai-Kia integrated turning and milling centre has been developed for cost-effective 'single-hit' cycles for components produced from bar stock up to 65mm diameter.

Turn/mill centre machines 65mm bar stock Latest Hyundai-Kia integrated turning and milling centre has been developed for cost-effective 'single-hit' cycles for components produced from bar stock up to 65mm diameter. Fitted with a VDI 40, 12 station all-driven turret having +/-40mm Y-axis feed with 16mm tool shank size and M20 tapping capability, the latest SKT 210 SY Integrated Turn/Mill Center from Hyundai-Kia has been developed for cost-effective single hit cycles for components produced from bar stock up to 65mm diameter. Now part of the ever-growing stable of impressive turn/mill centres from C Dugard of Hove, Sussex, UK, this Y- and C-axis subspindle machine has a maximum turning diameter of 240mm diameter at the 15kW, 4,000 rev/min main spindle that carries an 8in chuck as standard.

The subspindle, fitted with a 5in chuck, is powered by a 3.7kW motor giving 6,000 rev/min and a rapid traverse rate of 36m/min.

In order to support milling and drilling cycles at both the main and subspindle positions, 0.001 deg spindle indexing is standard and a manual Q-Setter tool setting probe is fitted to speed toolchange and machine setting.

Axis strokes are 220mm in X, 550mm in Z, 750mm in ZB and +/-40 mm in Y.

The driven tools are powered by 2.7kW motor and the mach